Technical Articles

/Technical Articles

Failure Modes in ESD Testing – Case Studies

December 9th, 2016|

BY Sanjib Acharya Engg. Technical Leader, GE Intelligent Platforms. Abstract One of the Electromagnetic Compatibility (EMC) tests performed to test the immunity of electrical and electronic products or systems against Electrostatic Discharge (ESD). The ESD [...]

Impurities in Solder Alloys

July 31st, 2012|

By Mr. R.V. Sudhakar Director, Electronics Test & Development Centre, Government of India, Hyderabad. Zero defect soldering requires consistent solder quality. Contaminants and high oxide levels in solder can result in soldering defects such as [...]

Change to ISO 9001: 2015 Implications

July 31st, 2012|

By Prof. Mitter Vedu ISO 9000:2015 and ISO 9001:2015 are here from September 23, 2015. It is the new Quality Management Systems (QMS) Standard to which all organizations are required to shift from certification to [...]